BSMTW - S7552 ACRYLIC ENAMEL TINT BASE

  • MSDS: BSMTW
  • Manufacturer: DEL PAINT CORP
  • Product Name: S7552 ACRYLIC ENAMEL TINT BASE
  • National Stock Number: 8010-00F031183
Product Identification

Product ID:S7552 ACRYLIC ENAMEL TINT BASE
MSDS Date:11/30/1992
FSC:8010
NIIN:00F031183
MSDS Number: BSMTW

Responsible Party
DEL PAINT CORP
3105 E RENO AVE
OKLAHOMA CITY, OK 73117-6699
US

Emergency Phone: 800-866-6823

Info Phone: 405-672-1431

Cage: EO523

Contractor
DEL PAINT MFG
OKLAHOMA CITY, OK 73117 US

Telephone: 405-672-1431

Cage: 39934

Ingredients

DIMETHYL AMINOETHANOL

CAS: 108-01-0

RTECS: KK6125000

Fraction By Weight: 0.38%


8.56

RTECS: 9999999WG


2-((2-ETHYLHEXYL)OXY), ETHYLENE GLYCOL, 2-ETHYL HEXYL ETHER

CAS: 1559-35-9

RTECS: KK9625000

Fraction By Weight: 3.32%


BENZYL ALCOHOL

CAS: 100-51-6

RTECS: DN3150000

Fraction By Weight: 3.32%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT & LUNG
IRRITATION. SKIN/EYES: SLIGHT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE & NAUSEA.
Medical Cond Aggravated by Exposure:LUNG DISEASE

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS. SKIN: WASH THOROUGHLY W/SOAP & WATER.
INGESTION: GIVE 2 GLASSES OF WATER TO DRINK. NEVER GIVE ANYTHING TO
AN UNCONS CIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:216F,102C
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS IN PRESSURE-DEMAND MODE & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 100C/212F.
POLYMER FILM CAN BURN.

Accidental Release

Spill Release Procedures:CONTAIN IMMEDIATELY W/INERT MATERIALS SUCH AS
SAND OR EARTH. TRANSFER LIQUIDS & SOLID DIKING MATERIAL TO SEPARATE
SUITABLE CONTAINERS FOR RECOVERY/DISPOSAL.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING, MATERIAL MAY
COAGULATE. THE MINIMUM RECOMMENDED STORAGE TEMPERATURE IS 40F,
MAXIMUM IS 120F. USE W/ ADEQUATE VENTILATION.
Other Precautions:KEEP LID TIGHTLY CLOSED AFTER EACH USE. AVOID SKIN &
EYE CONTACT. AVOID INHALATION OF VAPORS.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR TO REMOVE ORGANIC
VAPORS TO REMOVE AIRBORNE PARTICLES
Ventilation:RECOMMEND AT LEAST 10 AIR CHANGES PER HOUR FOR GOOD GENERAL
ROOM. USE LOCAL EXHAUST IF NECESSARY.
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH & WASHING FACILITIES
Supplemental Safety and Health
RECORD AMMENDED BY FP-D ON 06FEB97;HCC ADDED,SPECIFICATION NUMBER WAS
MOVED INTO THE CORRECT FIELD,CARC FLAG IN LABEL WAS FIXED.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212-644F
Vapor Density:<1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:64.01

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZERS
Stability Condition to Avoid:HEAT & FLAMES
Hazardous Decomposition Products:CO2

Disposal

Waste Disposal Methods:KEEP SPILLS & CLEANING RUNOFF OUT OF MUNICIPAL
SEWERS & OPEN BODIES OF WATER. DISPOSE OF IN ACCORDANCE W/FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.